Areas of use
IN
Aspect
Satin
Spreading rate
6 to 10 m²/l
Touch dry
6 hours
Recoatable
24 hours to 7 days
Cleaning of equipment
Water
Indoor substrates previously coated in a two-pack paint, primer sealer or varnish:
- Floors made of: concrete, cement coating and derivatives.
- Wall surfaces made of: brick, concrete, cement coating, wall tiles, ceramic…
Can be applied as a primary and finishing coat on ceramic and wall tiles that are prepared and unpainted.
Is not suitable for tiled floors or for previous coats of one-pack products.
Our EPOXY AQUA can be applied in areas where food products are used, processed, and handled, in accordance with the Corrigendum to Council Regulation (EC) No 852/2004 of the European Parliament and of the Council on the hygiene of foodstuffs.
Our EPOXY AQUA is not lactic acid-resistant. Avoid using it in dairy plants, cheese plants, ...
- Water-thinnable, odourless and non-flammable.
- Isolates most water-soluble stains after carefully cleaning the substrate.
- Excellent adhesion on previous coats of two-pack paint, primer sealer and varnish.
- Ease of application.
- Resistant to washing, abrasion, sporadic contact with vegetable and mineral oils, alkaline solutions and diluted acids.
With the 3 bases (W, M and TR), obtain a range of over 30,000 shades.
Our EPOXY AQUA contains an epoxy resin that ages differently and does not have the same whiteness as an acrylic resin. Tip: dye the product in a colour different to the one on the walls covered in acrylic paint.
Please be aware that the darker the shade, the weaker the chemical and mechanical resistance.
Ready-to-use.
On slightly absorbent substrates, dilute the first coat with approximately 5 to 10% water.
Do not dilute the product if you want to isolate a water-soluble stain.