Areas of use
OUT
Aspect
Semi-matt
Spreading rate
12 to 15 m²/l
Touch dry
4 hours
Recoatable
15 hours
Cleaning of equipment
White spirit
Bare or previously painted outdoor and indoor woodwork. Can be applied on indoor substrates made of plaster, plasterboard… with water-soluble stains (nicotine, soot, coffee, ink...)..
Can be applied on indoor stairs, parquet and hardwood floors, as long as they are then covered with a urethane alkyd resin-based solvent-borne finishing lacquer.
Is not suitable for bare exotic woods or bare alkaline substrates (concrete, lime, cement…).
- High covering effect.
- Good water vapour permeability and excellent watertightness.
- Isolates most water-soluble stains (nicotine, soot, coffee...) after carefully cleaning the substrate.
- Permeates the wood deeply.
- Very strong adhesion.
- Improves the open time of finishing coats.
- Smooth film, easy to sand.
This product, available in white (base W), can be tinted in all pastel shades.
Ready-to-use.
On slightly powdery or absorbent substrates, dilute the first coat with 5 to 10% white spirit.
Do not dilute the product if you want to isolate a water-soluble stain.